Pool Lab 1.0 Photometer Electronic Water Tester
- The Pool Lab 1.0 is now discontinued. Click here to check out the Brand New Multi-Chamber Pool Lab 2.0
- PoolLab 1.0 Photometer for Electronic Swimming Pool and Hot Tub Testing.
- Tests for - PH, Chlorine (free/combined/total), Alkalinity (Acid Capacity), Cyanuric Acid (Stabilizer), Active Oxygen (MPS), Bromine, Chlorine Dioxide, Ozone
- Hydrogen Peroxide, Total Hardness, Calcium Hardness, Urea & PHMB.
- FREE APP and Bluetooth 4.0 technology.
- Forget the guesswork, get accurate results and improve your hot tub experience!
See Delivery Info and T&Cs
The new PoolLab® 1.0 is a triple wavelength photometer for professional water analysis of private swimming pools and hot tubs.
An in-built but changeable cuvette allows quick water sampling by just dipping in the IP68 waterproof PoolLab®.
PoolLab® with its 6 buttons is designed for instant access to the parameters installed, which are:
- PH
- Chlorine (free/combined/total)
- Alkalinity (Acid Capacity)
- Cyanuric Acid (Stabilizer)
- Active Oxygen (MPS)
- Bromine
- Chlorine Dioxide
- Ozone
- Hydrogen Peroxide
- Total Hardness
- Calcium Hardness
- Urea
- PHMB.
As PoolLab® uses wireless Bluetooth 4.0 technology, it can easily be connected to free software and app for test result management. Once test results are synchronized, software and app allow dosage recommendations, based on individually entered water treatment chemicals. User can print test result reports, perform index calculation, such as LSI, and much more.
A free cloud server takes care that data on app and software are constantly synchronized, if the user decides to use this feature.
Parameters
| Parameter | Range | Reagent |
|---|---|---|
| pH value | 6.50 - 8.40 pH | Phenol Red Photometer |
| Chlorine (free/combined/total) | 0.00 - 8.00 mg/l (ppm) | DPD N°1 Photometer DPD N°3 Photometer |
| Alkalinity (Acid Capacity) | 0 - 200 mg/l (ppm) CaCO3 | Alkalinity-M Photometer |
| Cyanuric Acid (Stabilizer) | 0 - 160 mg/l (ppm) | CYA-Test Photometer |
| Active Oxygen (MPS) | 0.0 - 30.0 mg/l (ppm)* | DPD N°4 Photometer* |
| Bromine | 0.0 - 13.5 mg/l (ppm)** | DPD N°1 Photometer Glycine* |
| Chlorine Dioxide | 0.00 - 11.40 mg/l (ppm)** | DPD N°1 Photometer Glycine* |
| Ozone | 0.00 - 4.00 mg/l (ppm)** | DPD N°1 Photometer DPD N°3 Photometer Glycine* |
| Hydrogen Peroxide LR | 0.00 - 2.90 mg/l (ppm)* | Hyd. Peroxide LR Photometer* |
| Hydrogen Peroxide HR | 0 - 200 mg/l (ppm)* | Acidifying PT Photometer* Hyd. Peroxide HR Photometer* |
| Total Hardness | 0 - 500 mg/l (ppm)* | POL20TH1* POL10TH2* |
| Calcium Hardness | 0 - 500 mg/l (ppm)* | POL20CaH1* POL20CaH2* |
| Urea | 0.1 - 2.5 mg/l (ppm)* | PL Urea 1* PL Urea 2* |
| PHMB | 5 - 60 mg/l (ppm)* | PHMB Photometer* |
*requires reagent not included in basic kit
**requires Glycine reagent tablets if chlorine is present.
Glycine reagent tablets are not included in the basic kit
Included in the kit:
- PoolLab 1.0 Photometer
- Light shield
- 3 x AAA batteries
- Plastic stirring rod
- 20 tablets DPD N° 1 (free chlorine)
- 10 tablets DPD N° 3 (combined/total chlorine)
- 20 tablets Phenol Red (pH)
- 10 tablets Alkalinity-M (Alkalinity/Acid Capacity)
- 10 tablets CYA-Test (Cyanuric Acid/Stabilizer)
- Printed manual
All tablets are Photometer grade!
Basic guidance:
- Install batteries and screw the battery tight to ensure it is waterproof.
- Ensure the device is clean from any previous reagent residue.
- To Zero, take 10ml sample, place back the light shield and then hit Zero.
- Add the relevant reagent tablet (for example Phenol Red for PH), crush and stir until completely dissolved.
- Place the light shield back on.
- Press test and view the results.
