This pack includes 1 x Aquablanc O2 Tablets and 1 x Aquablanc Combination Liquid 1 Litre. The core products used in the Aquablanc Hot Tub Non-Chlorine Water Care System.
The Aquablanc Active O2 system is a dual action non-chlorine system requiring a weekly dose of Aquablanc A Combination Liquid, combined with O2 Tablets dosed via a floating dispenser prior to bathing.
Active Oxygen sanitation is based on potassium monopersulphate tablets.Potassium monopersulphate works in a similar way as chlorine or bromine in that it kills bacteria and breaks down bather waste. However, unlike chlorine or bromine, monopersulphates don't produce by-products that irritate the skin or eyes and cause nasty smells. Active Oxygen O2 tablets are used in conjunction with a weekly does of a liquid activator which also acts as an algaecide.
Always test one hour after application of the O2 tablets. The reading should be 5 - 10 ppm one hour after application.
What TA and pH levels should I maintain When using O2 as a sanitiser you should maintain the following water balance: TA 80 - 160 ppm pH 7.0 - 7.4 Total Hardness 250 - 500 ppm
Yes. A shock is necessary with any hot tub water treatment system because this is the only way of removing dissolved organic contaminants, such as perspiration, body oil, spray tan, make-up, etc from the water. You should shock weekly with Spa Fusion or a non chlorine shock depending on your hot tub use.
Simply drain your spa water, clean your filters and re-fill fresh to ensure no excess chlorine or bromine is in the system.
Yes, this is a non-chlorine and non-bromine system.
Yes, Aquablanc is perfectly fine for any type of hot tub.