iopool EcO Calibration Kit

The iopool calibration kit is a set of buffer solutions, which allow you to accurately calibrate the pH and ORP sensors of your EcO Smart Monitor.

The EcO calibration allows your smart monitor to adapt to the wear and tear of the electrochemical probe and thus take more accurate measurements, longer. Calibration is simply done by taking a measurement of a reference solution whose value is well known. Example: a pH 7 solution.

What is in the kit?

• 1x pH 4.00 calibration solution (0.7 oz / 20ml)
  1x pH 7.00 calibration solution (0.7 oz / 20ml)
  1x OPR +468mV calibration solution (0.7 oz / 20ml)

When to calibrate your EcO?

There is no need to calibrate before first use.
From the second season on, it is recommended to calibrate at the beginning of each season.
NB: If your Eco is never winterised (indoor pool, spa, Nordic bath,...) then it is advised to calibrate every year.

How to perform the calibration?

1. Remove EcO from the water, remove the silicone cap, and rinse the probe with clean water
2. Take 3 narrow and clean containers to pour the different solutions into. You can also directly plunge your EcO into the buffer solution sachets (without the bottom cap) 
3. Activate the internet (Wi-Fi or 4G) and Bluetooth on your smartphone. NB: Stay close to your device during the whole calibration process.
4. In the application, in "My pool/spa > Devices > EcO" press "Calibrate my EcO" and carefully follow the steps in the application.
5. Once the calibration is complete, replace the silicone cap in the analysis position and put the EcO back in your pool or spa.