Happy Hot Tubs Spa Sparkle Clarifier
- Happy Hot Tubs Spa Sparkle Clarifier
- Binds tiny non-filterable particles together to allow your filter to catch and remove.
- This soft flocculant will make your spa water sparkling
- Easy to dose, add liquid direct to hot tub water.
Happy Sparkle is used to add lustre and clarity to spa water. Ideal for use with cartridge filter pumps as on most above ground pools and spas. Sparkle clears cloudy water caused by non filterable waste particles that are too small for the filter to remove. Spa Sparkle combines together fine particles of dust in your water making the particles bigger and easier for the filter to trap, resulting in clear water.
- Test the spa water to ensure the correct PH and sanitiser levels are in place, adjust if necessary.
- Remove, clean and replace your filter cartridge.
- Shake bottle before adding measured dose directly over the suface of your spa water.
- Switch on spa and leave running for at least 1 hour.
- Repeat dose if necessary.
- Do not use spa for 30 minutes after adding this product.
Spas with excessive total dissolved solids (TDS) will need to be drained, cleaned and refilled.
| Litres of water | Initial dose | Weekly routine dose |
| 1000 | 50ml | 25ml |
| 1500 | 75ml | 40ml |
| 2000 | 100ml | 50ml |
| 4000 | 100ml | 100ml |
This product is not classified as hazardous, but precautions should be followed. Wear protective gloves, protective clothing, and eye/face protection. If it gets into the eyes, rinse cautiously with water for several minutes, remove contact lenses if present and easy to do, and continue rinsing; if irritation persists, seek medical advice.
Always read the label and product information before use. Store in a cool, dry place above 5°C and do not allow it to freeze. Handle the product in a well-ventilated area, preferably outdoors, and wash hands after use. Keep out of reach of children.